Description

G.P.T.CO Base Plate For Pump Systems — Zinc Plated Steel

The G.P.T.CO base plate is the mounting frame for a packaged pump system. It carries the pumps, the manifolds, and the electric panel stand on one rigid platform, so the assembly can be built on the bench, moved as a unit, and set down on the floor or on antivibration feet without the piping taking any of the load.

The body is a single folded channel in 3 mm FE 370 steel. The mounting plane runs the full length of the plate with slotted fixing holes, so pump feet can be positioned anywhere along the run — no drilling, no matching a specific bolt pattern. Fixing holes at both ends anchor the plate to the floor, and additional holes on the plane take the panel stand. The folded section is what gives a 3 mm sheet its stiffness: a flat plate of the same thickness would flex under a running pump and pass that movement straight into the joints.

Eight sizes cover 1, 2, 3 and 4 pump systems in two widths — 12″ for standard frames and 16″ where the pumps or the manifold spacing need a deeper mounting plane.

Technical Specifications / Dimensions

Item	code	Description	AINC (mm)	BINC (mm)	CINC (mm)	DINC (mm)	EINC (mm)	Carrying capacity(LB)	Data Sheet(PDF)
4088149	6800	2 Pumps	12 (310)	20 (520)	10 (250)	2 (54)	5 (130)	220
4088150	6802	2 Pumps	12 (310)	24 (620)	10 (250)	2 (54)	6 (150)	220
4088152	6803	3 Pumps	12 (310)	31 (800)	10 (250)	2 (54)	5 (130)	330
4088154	6804	4 Pumps	12 (310)	42 (1080)	10 (250)	2 (54)	5 (130)	440
4088148	6805	1 Pump	12 (310)	10 (260)	10 (250)	2 (54)	5 (130)	110
4088153	6806	3 Pumps	16 (400)	35 (900)	13 (340)	2 (54)	6 (150)	330
4088155	6807	4 Pumps	16 (400)	47 (1200)	13 (340)	2 (54)	6 (150)	440
4088151	6813	2 Pumps	16 (400)	28 (720)	13 (340)	2 (54)	6 (150)	220