Description

G.P.T.CO Vertical Manifold For 2 Pumps — Zinc Plated Steel

The G.P.T.CO vertical manifold is built for booster sets running vertical multistage pumps, where the pump ports face sideways rather than up. The branch connections turn 90° off the main body so the manifold sits parallel to the base plate and the pumps drop straight onto it — no elbow stack, no offset piping, and a noticeably shorter skid footprint than a horizontal header would allow.

The body is a one-piece zinc plated steel tube with male NPT threads at both ends, so it can be fed or discharged from either side, or coupled in-line on larger assemblies. Two male NPT branch connections extend from the body at equal spacing from the centerline, and two 1″ NPT ports on the body face accept a pressure vessel, relief valve, or crossover line. Three 1/4″ female sleeves along the top carry the gauge, pressure switch, or transducer.

Technical Specifications / Dimensions

Item	code	A(INC)	B(Ø & NPT)	C(NPT)	D(NPT)	E(INC)	F(INC)	G(G)	H(INC)	Weight(LB)	Data Sheet(PDF)
4088132	6500_90NPT	19-1/2	1-1/2″	1″	1″	12	14-1/2	1/4″	2	4.00
4088133	6503_90NPT	19-1/2	2″	1″	1″	12	14-1/2	1/4″	2	5.00
4088134	6501_90NPT	19-1/2	2″	1-1/4″	1″	12	14-1/2	1/4″	2	5.30
4088135	6510_90NPT	27-1/2	2″	1-1/4″	1″	14	14-1/2	1/4″	2	7.00
4088136	6505_90NPT	19-1/2	2″	1-1/2″	1″	12	14-1/2	1/4″	2	5.30
4088137	6511_90NPT	27-1/2	2″	1-1/2″	1″	14	15	1/4″	2	7.00
4088138	6502_90NPT	19-1/2	2-1/2″	1-1/4″	1″	12	14-1/2	1/4″	2	6.40
4088139	6513_90NPT	27-1/2	2-1/2″	1-1/4″	1″	14	15	1/4″	2	8.80
4088140	6506_90NPT	19-1/2	2-1/2″	1-1/2″	1″	12	14-1/2	1/4″	2	6.60
4088141	6512_90NPT	27-1/2	2-1/2″	1-1/2″	1″	14	15	1/4″	2	9.30
4088142	6504_90NPT	27-1/2	3″	2″	1″	14	15	1/4″	2	10.80

Dimension Key

Material & Construction