The HG 80-5.5 Trash Water Pump is a self-priming, 7.5Hp, monoblock, trash water pump made by Speroni.
Made in Italy.
- Liquid temperature up to 95°F (for home use according to EN 60335-2-41)
- Temperature max. liquid: 194°F (for other uses)
- Ambient temperature up to 104°F
- Total suction lift up to 23 ft.
- Three-phase 220V-60Hz
- Two-pole induction motor (n = 3450 min-1)
- Insulation Class F
- Protection IP 55
- Pump body: Cast Iron
- Motor Support: Cast Iron
- Impeller: Cast Iron
- Shaft with rotor: Stainless Steel 304
- Mechanical seal: Ceramic/Graphite/NBR
The HG 80-5.5 is a self-priming monoblock water pumps with an open impeller.
The check valve inside the suction outlet avoids the syphon effect when stopping and assures the automatic re-start each time.
The pump self-primes even if partially filled and if the suction hose is completely empty.
Suitable to drain clean or slightly dirty water and in flood irrigation systems.
|Manufacturer’s Warranty||1 year Limited Warranty|
|Impeller Material||Cast Iron|
|Port Size (in.)||3″|
|Flow (GPH)||7920 GPH|
|Volts||220V – Three Phase|
|Max. Total Head (ft.)||87|
|Max. Suction Lift (ft.)||23|
|Suction Port (in.)||2″|
|Discharge Port (in.)||2″|
|Dimensions L x W x H (in.)||26″ x 8″ x 17″|
|Product Weight (lbs.)||199|