• American Company
  • American Company
  • CALL US
  • +1 (786) 613-5872

WEG Multimounting IEC Motor – 230/460V, 10HP, 3550RPM, 3P, Model 00736ET3YAL132SFF-W2

5/5

WEG Multimounting IEC Motor – 230/460V, 10HP, 3550RPM, 3P, Model 00736ET3YAL132SFF-W2

SKU 5160130 Categories , , , Tags ,

Additional information

Brand

WEG

AC Voltage

230 volts, 460 volts

Phase

Three Phase

Material

Aluminum

Horsepower

10

RPM

3600

Explosion Proof

No

$1,139.49

Aluminum frame and removable feet being able to provide great flexibility and facilitate the change of configuration without requiring additional machining or modifications. Its terminal box can rotate every 90 degrees, allowing the connection of the motor cables on any side. Furthermore, these motors are totally interchangeable with the cast iron motors.

Product Features

Standard NEMA MG-1
Frequency 60 Hz
Voltage 230/460V
Number of poles 2
Degree of Protection IP55
Synchronous speed 3600 rpm
Output rating 10 HP
Flange FF
Mounting B35T
Terminal box Top
Enclosure IC411 – TEFC

  *If the item is over 100 lbs, forklift is required at commercial delivery location only, otherwise we will charge $100 Liftgate service fee . For residential addresses additional delivery fees may apply

Add to Cart

Description

Technical Data

V-Ring Seal

V-Ring Seal to avoid the liquids and dust inlet in the motor.

Capacitor

With runner capacitor, runner and permanent capacitor or permanent capacitor.

Cooling System

• The cooling system (fan, non-drive end shield and fan cover) is designed to minimize noise level and improve thermal efficiency.
• Steel plate fan cover provides high mechanical strength, corrosion resistance and extended lifetime.

Aluminum Frame

• FC-200 (EN GJL 200) aluminum frames meeting impact level IK08 (5J) ensuring superior mechanical strength for the most demanding applications.
• Solid motor feet providing excellent rigidity, allowing easier alignment and installation.

Centrifugal Switch

The starting system of W22 three phase motors was completely redesigned to improve functionality, thus increasing system reliability and lifespan.

Technical Data

Brand WEG
Frame 132S
Output 10 HP (7.5 kW)
Number of Poles 2
Frequency 60 Hz
Rated Speed 3550 rpm
Slip (%) 1.39
Rated Voltage (V) 230/460
Rated Current (A) 24.6/12.3
L. R. Amperes (A) 239/119
LRC (A) 9.7 Code L
No load Current (A) 10.4/5.20
Rated Torque (ft.lb) 20.1 Nm
Locked Rotor Torque (%) 300
Breakdown Torque (%) 400
Locked Rotor Time 23s (cold) 13s (hot)
Moment of Inertia (J) 0.5980 sq.ft.lb
Design N
Insulation Class F
Service Factor 1.25
Temperature Rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient Temperature -20°C to +40°C
Altitude 3280 ft
Degree of Protection IP55
Enclosure IC411 – TEFC
Mounting B35T
Rotation Both (CW and CCW)
Noise Level 67.0 dB(A)
Approx. Weight (lb) 139

Efficiency

50% 75% 100%
86.5 89.5 90.2

Power Factor

50% 75% 100%
0.68 0.79 0.85

Features

Frame Material Aluminum
Impregnation Method Dip and Bake Polyester
Main terminal box hole 2xM32x1,5
Terminal Block BMC – 6 pins
Shaft Locking Device Without
Drain Rubber, automatic
Shaft Material SAE 1040/45 Carbon Steel
Painting RAL 5009 207N (ISO 12944 – C2)
Grounding Lugs Single
Fan Cover Material Steel
Tropicalized Painting Without
Bearing cap Yes
Balancing Method 1/2 Key
Drip Cover Without
Overload Protector (phenolic) Without
Connection Cables Quantity 6
Fan Material Plastic

Dimensions

Additional information

Brand

WEG

AC Voltage

230 volts, 460 volts

Phase

Three Phase

Material

Aluminum

Horsepower

10

RPM

3600

Explosion Proof

No

PUMPDEPOT.US