• American Company
  • info@pumpdepot.us
  • American Company
  • info@pumpdepot.us
  • CALL US
  • +1 (786) 613-5872
  • EMAIL US
  • info@pumpdepot.com

WEG Rolled Steel Motor – 3HP, 230/460V – 3Ph, 60 Hz, 3505RPM, TEFC, Foot-mounted, Model 00336ET3EJPR56J-S

5/5

WEG Rolled Steel Motor – 3HP, 230/460V – 3Ph, 60 Hz, 3505RPM, TEFC, Foot-mounted, Model 00336ET3EJPR56J-S

SKU 5160416 Categories , , Tags , ,

Additional information

Brand

WEG

AC Voltage

230 volts, 460 volts

Horsepower

3

Phase

Material

Rolled Steel

RPM

3600

Explosion Proof

No

$483.99

The Rolled Steel motors line were developed for applications that demand performance, robustness and low weight integrated into a single product. The electrical and mechanical concept of the line make the motor present an optimum cost-benefit, providing reliability and energy savings.

Product Features

Standard NEMA MG-1
Frequency 60 Hz
Voltage 230/460V
Number of poles 2
Degree of Protection IP55
Synchronous speed 3600 rpm
Output rating 3 HP
Flange C
Mounting F-1
Terminal box Left position
Enclosure IC411 – TEFC

  *If the item is over 100 lbs, forklift is required at commercial delivery location only, otherwise we will charge $100 Liftgate service fee . For residential addresses additional delivery fees may apply

Add to Cart

Description

Technical Data

Technical Data

Brand WEG
Frame 56J
Output 3 HP
Number of Poles 2
Frequency 60 Hz
Rated Speed 3505 rpm
Slip (%) 2.64
Rated Voltage (V) 230/460
Rated Current (A) 7.34/3.67
L. R. Amperes (A) 68.3/34.1
LRC 9.3x (Code L)
No load Current (A) 3.20/1.60
Rated Torque (ft.lb) 4.49
Locked Rotor Torque (%) 280
Breakdown Torque (%) 380
Locked Rotor Time 18s (cold) 10s (hot)
Moment of Inertia (J) 0.1663 sq.ft.lb
Insulation Class F
Service Factor 1.15
Temperature Rise 80 K
Duty Cycle Cont. (S1)
Starting Method Direct On Line
Ambient Temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 – TEFC
Mounting F-1
Rotation CCW
Noise Level 68.0 dB(A)
Approx. Weight (lb) 45.5

Efficiency

25% 50% 75% 100%
78.7 81.0 84.0 86.5

Power Factor

25% 50% 75% 100%
0.45 0.71 0.82 0.87

Features

Frame Material Rolled Steel
Impregnation Method Dip and Bake Polyester
Main terminal box hole 1.881″
Terminal Block Without
Shaft Locking Device Without
Drain Rubber, automatic
Shaft Material AISI 304 Stainless Steel
Painting Munsell N 1 – Matte 207N (ISO 12944 – C2)
Grounding Lugs Single
Fan Cover material Steel
Tropicalized Painting Without
Bearing cap Yes
Drip Cover Without
Overload Protector (phenolic) Without
Screw Cap Carbon Steel SAE 1010/20
Fan Material Plastic

Dimensions

Additional information

Brand

WEG

AC Voltage

230 volts, 460 volts

Horsepower

3

Phase

Material

Rolled Steel

RPM

3600

Explosion Proof

No

PUMPDEPOT.US