• American Company
  • American Company
  • CALL US
  • +1 (786) 613-5872

WEG W22 Tru-Metric IEC Motor – 230/460V, 60HP, 3560RPM, 3P, Model 04536ET3Y225S/M-W22

5/5

WEG W22 Tru-Metric IEC Motor – 230/460V, 60HP, 3560RPM, 3P, Model 04536ET3Y225S/M-W22

SKU 5160204 Categories , , , Tags ,

Additional information

Brand

WEG

AC Voltage

460 volts

Horsepower

60

Phase

Three Phase

Material

Cast Iron

RPM

3600

Explosion Proof

No

$5,765.42

Cast Iron frame and removable feet being able to provide great flexibility and facilitate the change of configuration without requiring additional machining or modifications. Its terminal box can rotate every 90 degrees, allowing the connection of the motor cables on any side. Furthermore, these motors are totally interchangeable with the cast iron motors.

Product Features

Standard NEMA MG-1
Frequency 60 Hz
Voltage 230/460V
Number of poles 2
Degree of Protection IP55
Synchronous speed 3600 rpm
Output rating 60 HP
Flange FF
Mounting B35T
Terminal box Top
Enclosure IC411 – TEFC

  *If the item is over 100 lbs, forklift is required at commercial delivery location only, otherwise we will charge $100 Liftgate service fee . For residential addresses additional delivery fees may apply

Add to Cart

Description

Technical Data

V-Ring Seal

V-Ring Seal to avoid the liquids and dust inlet in the motor.

Capacitor

With runner capacitor, runner and permanent capacitor or permanent capacitor.

Cooling System

• The cooling system (fan, non-drive end shield and fan cover) is designed to minimize noise level and improve thermal efficiency.
• Steel plate fan cover provides high mechanical strength, corrosion resistance and extended lifetime.

Cast Iron Frame

• FC-200 (EN GJL 200) cast iron frames meeting impact level IK08 (5J) ensuring superior mechanical strength for the most demanding applications.
• Solid motor feet providing excellent rigidity, allowing easier alignment and installation.

Centrifugal Switch

The starting system of W22 three phase motors was completely redesigned to improve functionality, thus increasing system reliability and lifespan.

Technical Data

Brand WEG
Frame 200L
Output 60 HP
Number of Poles 2
Frequency 60 Hz
Rated Speed 3560 rpm
Slip (%) 1.11
Rated Voltage (V) 230/460
Rated Current (A) 138/69.1
L. R. Amperes (A) 967/483
LRC (A) 7.0
No load Current (A) 43.0/21.5
Rated Torque (ft.lb) 121 Nm
Locked Rotor Torque (%) 280
Breakdown Torque (%) 290
Locked Rotor Time 32s (cold) 18s (hot)
Moment of Inertia (J) 5.02 sq.ft.lb
Design N
Insulation Class F
Service Factor 1.25
Temperature Rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient Temperature -20°C to +40°C
Altitude 3280 ft
Degree of Protection IP55
Enclosure IC411 – TEFC
Mounting B35T
Rotation Both (CW and CCW)
Noise Level 76.0 dB(A)
Approx. Weight (lb) 584

Efficiency

25% 50% 75% 100%
93.5 94.0 94.0

Power Factor

25% 50% 75% 100%
0.77 0.84 0.897

Features

Frame Material Cast Iron
Impregnation Method Constant Resin Flow
Main terminal box hole 2xM50x1,5
Terminal Block BMC – 6 pins
Shaft Locking Device Without
Drain Rubber, automatic
Shaft Material SAE 1040/45 Carbon Steel
Painting RAL 5009 203A (ISO 12944 – C2)
Grounding Lugs Double
Fan Cover Material Cast Iron
Tropicalized Painting Without
Bearing cap Yes
Balancing Method 1/2 Key
Drip Cover Without
Overload Protector (phenolic) Without
Connection Cables Quantity 6
Fan Material Plastic

Dimensions

Additional information

Brand

WEG

AC Voltage

460 volts

Horsepower

60

Phase

Three Phase

Material

Cast Iron

RPM

3600

Explosion Proof

No

PUMPDEPOT.US