• American Company
  • American Company
  • CALL US
  • +1 (786) 613-5872

WEG W22 Tru-Metric IEC Motor – 230/460V, 75HP, 1780RPM, 3P, Model Z05518ET3F010322

5/5

WEG W22 Tru-Metric IEC Motor – 230/460V, 75HP, 1780RPM, 3P, Model Z05518ET3F010322

SKU 5160214 Categories , , , Tags ,

Additional information

Brand

WEG

AC Voltage

230 volts, 460 volts

Horsepower

75

Phase

Three Phase

Material

Cast Iron

RPM

1800

Explosion Proof

No

$7,418.07

Cast Iron frame and removable feet being able to provide great flexibility and facilitate the change of configuration without requiring additional machining or modifications. Its terminal box can rotate every 90 degrees, allowing the connection of the motor cables on any side. Furthermore, these motors are totally interchangeable with the cast iron motors.

Product Features

Standard NEMA MG-1
Frequency 60 Hz
Voltage 230/460V
Number of poles 4
Degree of Protection IP55
Synchronous speed 1800 rpm
Output rating 75 HP
Flange FF
Mounting B35T
Terminal box Top
Enclosure IC411 – TEFC

  *If the item is over 100 lbs, forklift is required at commercial delivery location only, otherwise we will charge $100 Liftgate service fee . For residential addresses additional delivery fees may apply

Add to Cart

Description

Technical Data

V-Ring Seal

V-Ring Seal to avoid the liquids and dust inlet in the motor.

Capacitor

With runner capacitor, runner and permanent capacitor or permanent capacitor.

Cooling System

• The cooling system (fan, non-drive end shield and fan cover) is designed to minimize noise level and improve thermal efficiency.
• Steel plate fan cover provides high mechanical strength, corrosion resistance and extended lifetime.

Cast Iron Frame

• FC-200 (EN GJL 200) cast iron frames meeting impact level IK08 (5J) ensuring superior mechanical strength for the most demanding applications.
• Solid motor feet providing excellent rigidity, allowing easier alignment and installation.

Centrifugal Switch

The starting system of W22 three phase motors was completely redesigned to improve functionality, thus increasing system reliability and lifespan.

Technical Data

Brand WEG
Frame 225S/M
Output 75 HP (55 kW)
Number of Poles 4
Frequency 60 Hz
Rated Speed 1780 rpm
Slip (%) 1.28
Rated Voltage (V) 230/460
Rated Current (A) 170/85.1
L. R. Amperes (A) 1277/638
LRC (A) 7.5
No load Current (A) 64.1/32.0
Rated Torque (ft.lb) 296 Nm
Locked Rotor Torque (%) 260
Breakdown Torque (%) 280
Locked Rotor Time 38s (cold) 21s (hot)
Moment of Inertia (J) 17.4 sq.ft.lb
Design N
Insulation Class F
Service Factor 1.25
Temperature Rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient Temperature -20°C to +40°C
Altitude 3280 ft
Degree of Protection IP55
Enclosure IC411 – TEFC
Mounting B35T
Rotation Both (CW and CCW)
Noise Level 67.0 dB(A)
Approx. Weight (lb) 948

Efficiency

50% 75% 100%
94.5 95.0 95.4

Power Factor

50% 75% 100%
0.72 0.81 0.85

Features

Frame Material Cast Iron
Impregnation Method Dip and Bake Polyester
Main terminal box hole 2xM50x1,5
Terminal Block BMC – 6 pins
Shaft Locking Device Without
Drain Rubber, automatic
Shaft Material SAE 1040/45 Carbon Steel
Painting RAL 5009 207N (ISO 12944 – C2)
Grounding Lugs Single
Fan Cover Material Cast Iron
Tropicalized Painting Without
Bearing cap Yes
Balancing Method 1/2 Key
Drip Cover Without
Overload Protector (phenolic) Without
Connection Cables Quantity 6
Fan Material Plastic

Dimensions

Additional information

Brand

WEG

AC Voltage

230 volts, 460 volts

Horsepower

75

Phase

Three Phase

Material

Cast Iron

RPM

1800

Explosion Proof

No

PUMPDEPOT.US