- info@www.pumpdepot.us
- Best quality in service!
- American Company
- info@pumpdepot.us
24/7 Online store
-
American Company
- info@pumpdepot.us
- CALL US
- +1 (786) 613-5872
- EMAIL US
- info@pumpdepot.com
American Company
Menu
WEG Motor W40 – 30HP, 230/460V – 3Ph, 60 Hz, 1770RPM, ODP, Foot-mounted, Model 03018OT3E286T-W40
5/5
WEG Motor W40 – 30HP, 230/460V – 3Ph, 60 Hz, 1770RPM, ODP, Foot-mounted, Model 03018OT3E286T-W40
Free Shipping
Additional information
| Brand | WEG |
|---|---|
| AC Voltage | 230 volts, 460 volts |
| Horsepower | 30 |
| Phase | Three Phase |
| Material | Cast Iron |
| RPM | 1800 |
| Explosion Proof | No |
$1,961.99
The W40 motor is a general purpose line designed for environments where dirt and moisture are minimal. The W40 cast iron frame is designed to provide maximum ventilation and heat dissipation, offering low vibration levels, high mechanical stiffness and durability.
Product Features
| Standard | NEMA MG-1 |
|---|---|
| Frequency | 60 Hz |
| Voltage | 230/460V |
| Number of poles | 4 |
| Degree of Protection | IP23 |
| Synchronous speed | 1800 rpm |
| Output rating | 30 HP |
| Flange | Without |
| Mounting | F-1 |
| Terminal box | Left position |
| Enclosure | IC01 – ODP |
*If the item is over 100 lbs, forklift is required at commercial delivery location only, otherwise we will charge $100 Liftgate service fee . For residential addresses additional delivery fees may apply
Description
Technical Data
V-Ring Seal
V-Ring Seal to avoid the liquids and dust inlet in the motor.
Capacitor
With runner capacitor, runner and permanent capacitor or permanent capacitor.
Cooling System
• The cooling system (fan, non-drive end shield and fan cover) is designed to minimize noise level and improve thermal efficiency.
• Steel plate fan cover provides high mechanical strength, corrosion resistance and extended lifetime.
Cast Iron Frame
• FC-200 (EN GJL 200) cast iron frames meeting impact level IK08 (5J) ensuring superior mechanical strength for the most demanding applications.
• Solid motor feet providing excellent rigidity, allowing easier alignment and installation.
Centrifugal Switch
The starting system of W40 three phase motors was completely redesigned to improve functionality, thus increasing system reliability and lifespan.
Technical Data
| Brand | WEG |
|---|---|
| Frame | 284/6T |
| Output | 30 HP |
| Number of Poles | 4 |
| Frequency | 60 Hz |
| Rated Speed | 1770 rpm |
| Slip (%) | 1.67 |
| Rated Voltage (V) | 230/460 |
| Rated Current (A) | 69.8/34.9 |
| L. R. Amperes (A) | 461/230 |
| LRC | 6.6x (Code G) |
| No load Current (A) | 24.2/12.1 |
| Rated Torque (ft.lb) | 89.0 |
| Locked Rotor Torque (%) | 240 |
| Breakdown Torque (%) | 270 |
| Locked Rotor Time | 32s (cold) 18s (hot) |
| Moment of Inertia (J) | 4.52 sq.ft.lb |
| Insulation Class | F |
| Service Factor | 1.25 |
| Temperature Rise | 80 K |
| Duty Cycle | Cont. (S1) |
| Starting Method | Direct On Line |
| Ambient Temperature | -20°C to +40°C |
| Altitude | 1000 m.a.s.l. |
| Degree of Protection | IP23 |
| Enclosure | IC01 – ODP |
| Mounting | F-1 |
| Rotation | Both (CW and CCW) |
| Noise Level | 64.0 dB(A) |
| Approx. Weight (lb) | 398 |
Efficiency
| 25% | 50% | 75% | 100% |
|---|---|---|---|
| 93.4 | 93.6 | 94.1 | 94.1 |
Power Factor
| 25% | 50% | 75% | 100% |
|---|---|---|---|
| 0.46 | 0.7 | 0.8 | 0.84 |
Features
| Frame Material | Cast Iron |
|---|---|
| Impregnation Method | Dip and Bake Polyester |
| Main terminal box hole | NPT 1 1/2″ |
| Terminal Block | Without |
| Shaft Locking Device | Without |
| Drain | Rubber, automatic |
| Shaft Material | SAE 1040/45 Carbon Steel |
| Painting | RAL 5009 203A (ISO 12944 – C3) |
| Grounding Lugs | Single |
| Fan Cover Material | Without |
| Tropicalized Painting | Without |
| Bearing Cap | Yes |
| Drip Cover | Without |
| Overload Protector (phenolic) | Without |
| Screw Cap | Carbon Steel SAE 1010/20 |
Dimensions
Additional information
| Brand | WEG |
|---|---|
| AC Voltage | 230 volts, 460 volts |
| Horsepower | 30 |
| Phase | Three Phase |
| Material | Cast Iron |
| RPM | 1800 |
| Explosion Proof | No |
Related products
-
Free ShippingWEG Motor W40 – 40HP, 230/460V – 3Ph, 60 Hz, 1775RPM, ODP, Foot-mounted, Model 04018OT3E324T-W40
$2,399.99 Add to cart -
Free ShippingWEG Motor W22 – 15HP, 230/460V – 3Ph, 60 Hz, 1768RPM, TEFC, Foot-mounted, Model 01518ET3E254T-W22
$1,432.99 Add to cart -
Free ShippingWEG Rolled Steel Motor – 10HP, 230/460V – 3Ph, 60 Hz, 1770RPM, ODP, Foot-mounted, Model 01018OT3E215T-S
$854.99 Add to cart -
Free ShippingWEG Close Coupled Motor – 7.5HP, 230V – 1Ph, 60 Hz, 3510RPM, ODP, Foot-mounted, Model 00736OS1C213JM
$1,214.99 Add to cart
PUMPDEPOT.US