• American Company
  • info@pumpdepot.us
  • American Company
  • info@pumpdepot.us
  • CALL US
  • +1 (786) 613-5872
  • EMAIL US
  • info@pumpdepot.com

WEG Rolled Steel Motor – 3HP, 230/460V – 3Ph, 60 Hz, 3515RPM, TEFC, Foot-mounted, Model 00336ET3E182JM-S

5/5

WEG Rolled Steel Motor – 3HP, 230/460V – 3Ph, 60 Hz, 3515RPM, TEFC, Foot-mounted, Model 00336ET3E182JM-S

SKU 5160411 Categories , , Tags , ,

Additional information

Brand

WEG

AC Voltage

230 volts, 460 volts

Horsepower

3

Phase

Three Phase

Material

Rolled Steel

RPM

3600

Explosion Proof

No

$711.99

The Rolled Steel motors line were developed for applications that demand performance, robustness and low weight integrated into a single product. The electrical and mechanical concept of the line make the motor present an optimum cost-benefit, providing reliability and energy savings.

Product Features

Standard NEMA MG-1
Frequency 60 Hz
Voltage 230/460V
Number of poles 2
Degree of Protection IP55
Synchronous speed 3600 rpm
Output rating 3 HP
Flange C
Mounting F-1
Terminal box Left position
Enclosure IC411 – TEFC

  *If the item is over 100 lbs, forklift is required at commercial delivery location only, otherwise we will charge $100 Liftgate service fee . For residential addresses additional delivery fees may apply

Add to Cart

Description

Technical Data

Technical Data

Brand WEG
Frame 182/4JM
Output 3 HP
Number of Poles 2
Frequency 60 Hz
Rated Speed 3515 rpm
Slip (%) 2.36
Rated Voltage (V) 230/460
Rated Current (A) 7.34/3.67
L. R. Amperes (A) 64.6/32.3
LRC 8.8x (Code K)
No load Current (A) 3.22/1.61
Rated Torque (ft.lb) 4.48
Locked Rotor Torque (%) 220
Breakdown Torque (%) 300
Locked Rotor Time 39s (cold) 22s (hot)
Moment of Inertia (J) 0.1564 sq.ft.lb
Insulation Class F
Service Factor 1.15
Temperature Rise 80 K
Duty Cycle Cont. (S1)
Starting Method Direct On Line
Ambient Temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 – TEFC
Mounting F-1
Rotation Both (CW and CCW)
Noise Level 68.0 dB(A)
Approx. Weight (lb) 69.6

Efficiency

25% 50% 75% 100%
83.6 84.0 86.5 86.5

Power Factor

25% 50% 75% 100%
0.44 0.71 0.82 0.87

Features

Frame Material Rolled Steel
Impregnation Method Dip and Bake Polyester
Main terminal box hole 1.118″
Terminal Block Without
Shaft Locking Device Without
Drain Rubber, automatic
Shaft Material SAE 1040/45 Carbon Steel
Painting Munsell N 1 – Matte 207N (ISO 12944 – C2)
Grounding Lugs Single
Fan Cover material Steel
Tropicalized Painting Without
Bearing cap Yes
Drip Cover Without
Overload Protector (phenolic) Without
Screw Cap Carbon Steel SAE 1010/20
Fan material Plastic

Dimensions

Additional information

Brand

WEG

AC Voltage

230 volts, 460 volts

Horsepower

3

Phase

Three Phase

Material

Rolled Steel

RPM

3600

Explosion Proof

No

PUMPDEPOT.US