• American Company
  • info@pumpdepot.us
  • American Company
  • info@pumpdepot.us
  • CALL US
  • +1 (786) 613-5872
  • EMAIL US
  • info@pumpdepot.com

DAB, Water Booster System E.SYBOX DIVER – 1902GPH, 1.3HP, 230V

5/5

DAB, Water Booster System E.SYBOX DIVER – 1902GPH, 1.3HP, 230V

Brand

DAB-USA

Horsepower

1.3

AC/DC Pumps

AC Voltage

230 volts

Category AC Pumps

, ,

$2,443.99

DAB’s ESYBOX DIVER is a 7” multi-stage electronic pump with variable frequency drive for clean water designed for use in rain water tanks, wells, cisterns or tanks.

Usable submerged, partially submerged or on the surface (with the appropriate accessory). It is suitable for pressurization, reuse of rainwater and activities. gardening and irrigation in domestic and residential environments. The pump can also be installed horizontally. Equipped with PLC (Powerline Communication) and Wi-Fi technology. If combined with an identical pump two Esydivers can work in twin mode one in place of the other or in support mode when the system requests are higher than what can be supplied by a single pump.
Available in version X with 1″ union and kit X which includes the 3.3ft / 1 meter suction pipe and float to prevent the suction of impurities from the bottom. The entire pump is IP68 certified. With the DOC68 accessory (supplied separately) it becomes an IP68 surface pump to be used under the leaf. Certified version for drinking water available on request.

Applications

  • Pumping water from underground cisterns
  • Pumping water from water storage tanks
  • Pumping water from RO Water storage tanks
  • Pumping from shallow water wells
  • Domestic water pressurization
  • Water pressurization for irrigation systems

Specifications

BrandDAB
ModelESYBOX DIVER
Flow rate maximum31.7gpm (7.2 m3/h)
Head up to180ft (55m)
Maximum immersion depth39ft (12m) standard version
Type of pumped liquidClean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallized and chemically neutral
Minimum suction depth4.33” (110mm)
Minimum level of water1.38” (35mm)
Liquid temperature rangeFrom 32°F to 131°F (+0°C to +55°C)
Outlet connectionThreated 1” 1/4 NPT
Pump maximum diameter185mm
Impeller/s materialTechnopolymer / AISI 304 Stainless steel
CertificationCSA C22.2 No. 108-14- 5th Ed. – Liquid Pumps
UL 778 6th Ed. – Motor Operated Water Pumps
NSF 61 Drinking Water & NSF 372 Drinking Water – Low Lead Content

 

colors.png Technical Data

colors.png User Manual

colors.png Commercial Leaflet

 

Estimated Delivery Time: 3 – 5 Business days

  *If the item is over 100 lbs, forklift is required at commercial delivery location only, otherwise we will charge $100 Liftgate service fee . For residential addresses additional delivery fees may apply

Construction Features of the Pump

Technopolymer pump body to resist corrosion and oxidation. Integrated non-return valve. Integrated debris filter. Overpressure valve to resist the formation of ice and protect from water hammer. On the pump body there is a air-vent valve that improves priming during the first installation or in the event of emptying the tank/well, and a stainless steel handle to move the pump. Integrated 0,04 liter expansion vessel sized to prevent the pump from cycling in the event of small leaks and to compensate for water hammer. No maintenance or recharging is required. The coupling between the three impellers in technopolymer, the floating ring and the smoothing disc both in stainless steel allow a limited wear of the hydraulics and a more precise alignment of the components. Suction height can be adjusted using the appropriate accessory (included): 1.4” 1.6” 2.4” 3.2” (3.5, 4, 6 or 8 cm).

Construction Features of the Motor

High efficiency Permanent Magnet submersible motor cooled by the pumped liquid. hydraulic side of the motor shaft in AISI 303 stainless steel. Double mechanical seal in oil chamber where the seal on the motor side is subjected only to submersible pressure 14 psi (1 bar), while the other side is subjected to operating pressure up to 80psi (5.5 bar) ensuring that the pump is watertight. Start-up capacitor and integrated anti-overheating motor thermal protection. Quick coupling/release cable to facilitate installation inside tanks or cisterns. Tear-off power cable connection.

Features of the Electronic

The electronic operation allows the pump to start and stop autonomously it is able to keep the working pressure adjustable from14 to 80 psi (1 to 5.5 bar), the variable frequency drive for operation according to the system requirements and protects against dry running. NFC (Near Field Communication) pocket for the use of a float sensor (supplied separately) which can be connected without opening the pump maintaining a watertight seal. Thanks to the PLC communication technology, the pump transmits data through the power cable to the DConnect Box 2.

DConnect Box 2

Thanks to the DConnect Box 2 and the DConnect app it is possible to check and manage the system pressure, alarms and the amount of residual water in the tank directly from your smartphone or tablet. DConnect Box 2 supplied as standard.

Brand

DAB-USA

Horsepower

1.3

AC/DC Pumps

AC Voltage

230 volts

Category AC Pumps

, ,

PUMPDEPOT.US